/* jshint -W041, -W083 */
/* jslint browser: true*/
/* global cordova,StatusBar,angular,console */
// controller for Monitor View
// refer to comments in EventCtrl for the modal stuff. They are almost the same
angular.module('zmApp.controllers')
.controller('zmApp.MonitorCtrl', ['$ionicPopup', 'zm', '$scope', 'ZMDataModel', 'message', '$ionicSideMenuDelegate', '$ionicLoading', '$ionicModal', '$state', '$http', '$rootScope', '$timeout','$ionicHistory', '$ionicPlatform',
function ($ionicPopup, zm, $scope, ZMDataModel, message, $ionicSideMenuDelegate, $ionicLoading, $ionicModal, $state, $http, $rootScope, $timeout, $ionicHistory, $ionicPlatform) {
//-----------------------------------------------------------------------
// Controller Main
//-----------------------------------------------------------------------
// var isModalOpen = false;
console.log("***EVENTS: Waiting for Monitors to load before I proceed");
$scope.monitors = [];
$scope.monitors = message;
var loginData = ZMDataModel.getLogin();
monitorStateCheck();
console.log("Setting Awake to " + ZMDataModel.getKeepAwake());
ZMDataModel.setAwake(ZMDataModel.getKeepAwake());
// --------------------------------------------------------
// Handling of back button in case modal is open should
// close the modal
// --------------------------------------------------------
$ionicPlatform.registerBackButtonAction(function (e) {
e.preventDefault();
if ($scope.modal.isShown())
{
// switch off awake, as liveview is finished
ZMDataModel.zmDebug("Modal is open, closing it");
ZMDataModel.setAwake(false);
$scope.modal.remove();
}
else
{
ZMDataModel.zmDebug("Modal is closed, so toggling or exiting");
if (!$ionicSideMenuDelegate.isOpenLeft())
{
$ionicSideMenuDelegate.toggleLeft();
}
else
{
navigator.app.exitApp();
}
}
}, 1000);
$scope.openMenu = function () {
$ionicSideMenuDelegate.toggleLeft();
};
//----------------------------------------------------------------
// Alarm notification handling
//----------------------------------------------------------------
$scope.handleAlarms = function()
{
$rootScope.isAlarm=!$rootScope.isAlarm;
if (!$rootScope.isAlarm)
{
$rootScope.alarmCount="0";
$ionicHistory.nextViewOptions({disableBack: true});
$state.go("events", {"id": 0}, { reload: true });
}
};
//-----------------------------------------------------------------------
// This function takes care of changing monitor parameters
// For now, I've only limited it to enable/disable and change monitor mode
// and changing monitor function
//-----------------------------------------------------------------------
$scope.changeConfig = function (monitorName, monitorId, enabled, func) {
var checked = false;
console.log("called with " + monitorId + ":" + enabled + ":" + func);
if (enabled == '1') checked = true;
$scope.monFunctions = [
{
text: "Modect",
value: "Modect"
},
{
text: "Mocord",
value: "Mocord"
},
{
text: "Record",
value: "Record"
},
{
text: "Nodect",
value: "Nodect"
},
{
text: "Monitor",
value: "Monitor"
},
{
text: "None",
value: "None"
}
];
$scope.monfunc = {
myfunc: func,
myenabled: checked
};
$rootScope.zmPopup = $ionicPopup.show({
scope: $scope,
template: 'Enabled {{item.text}} ',
title: 'Change Settings for ' + monitorName,
buttons: [
{
text: 'Cancel',
},
{
text: 'Save',
onTap: function (e) {
ZMDataModel.zmDebug("MonitorCtrl:changeConfig selection:" + $scope.monfunc.myenabled +
$scope.monfunc.myfunc);
var loginData = ZMDataModel.getLogin();
var apiRestart = loginData.apiurl + "/states/change/restart.json";
var apiMon = loginData.apiurl + "/monitors/" + monitorId + ".json";
ZMDataModel.zmDebug("MonitorCtrl: URLs for changeConfig save:" + apiMon);
var isEnabled = "";
isEnabled = ($scope.monfunc.myenabled == true) ? '1' : '0';
$ionicLoading.show({
template: "Applying changes. Please wait...",
noBackdrop: true,
duration: zm.largeHttpTimeout,
});
$http({
url: apiMon,
method: 'post',
headers: {
'Content-Type': 'application/x-www-form-urlencoded',
'Accept': '*/*',
},
transformRequest: function (obj) {
var str = [];
for (var p in obj)
str.push(encodeURIComponent(p) + "=" +
encodeURIComponent(obj[p]));
var foo = str.join("&");
// console.log("****RETURNING " + foo);
ZMDataModel.zmDebug("MonitorCtrl: parmeters constructed: " + foo);
return foo;
},
data: {
'Monitor[Function]': $scope.monfunc.myfunc,
'Monitor[Enabled]': isEnabled,
}
})
// I am not restarting ZM after monitor change
.success(function () {
$ionicLoading.hide();
ZMDataModel.zmDebug("MonitorCtrl: Not restarting ZM - Make sure you have the patch installed in MonitorsController.php or this won't work");
doRefresh();
/* ZMDataModel.zmDebug ("MonitorCtrl: Restarting ZM");
$ionicLoading.show({
template: "Successfully changed Monitor. Please wait, restarting ZoneMinder...",
noBackdrop: true,
duration: zm.largeHttpTimeout,
});
$http.post(apiRestart)
.then(function (success) {
$ionicLoading.hide();
var refresh = ZMDataModel.getMonitors(1);
refresh.then(function (data) {
$scope.monitors = data;
$scope.$broadcast('scroll.refreshComplete');
});
},
function (error) {
$ionicLoading.hide();
}
);*/
})
.error(function (data, status, headers, config) {
ZMDataModel.zmDebug("MonitorCtrl: Error changing monitor " + JSON.stringify(data));
$ionicLoading.hide();
$ionicLoading.show({
template: "Error changing Monitor. Please check ZM logs...",
noBackdrop: true,
duration: 3000,
});
});
}
},
]
});
};
// same logic as EventCtrl.js
$scope.finishedLoadingImage = function () {
console.log("***Monitor image FINISHED Loading***");
$ionicLoading.hide();
};
$scope.$on('$ionicView.loaded', function () {
console.log("**VIEW ** Monitor Ctrl Loaded");
});
//-------------------------------------------------------------------------
// Lets make sure we set screen dim properly as we enter
// The problem is we enter other states before we leave previous states
// from a callback perspective in ionic, so we really can't predictably
// reset power state on exit as if it is called after we enter another
// state, that effectively overwrites current view power management needs
//------------------------------------------------------------------------
$scope.$on('$ionicView.enter', function () {
console.log("**VIEW ** Monitor Ctrl Entered");
ZMDataModel.setAwake(false);
});
$scope.$on('$ionicView.leave', function () {
console.log("**VIEW ** Monitor Ctrl Left, force removing modal");
if ($scope.modal) $scope.modal.remove();
});
$scope.$on('$ionicView.unloaded', function () {
console.log("**VIEW ** Monitor Ctrl Unloaded");
});
$scope.openModal = function (mid, controllable, controlid) {
ZMDataModel.zmDebug("MonitorCtrl:Open Monitor Modal with monitor Id=" + mid +
" and Controllable:" + controllable + " with control ID:" + controlid);
$scope.monitorId = mid;
$scope.monitorName = ZMDataModel.getMonitorName(mid);
$scope.LoginData = ZMDataModel.getLogin();
$scope.rand = Math.floor(Math.random() * (999999 - 111111 + 1)) + 111111;
$rootScope.rand = Math.floor(Math.random() * (999999 - 111111 + 1)) + 111111;
$scope.ptzMoveCommand = "";
// This is a modal to show the monitor footage
// We need to switch to always awake if set so the feed doesn't get interrupted
ZMDataModel.setAwake(ZMDataModel.getKeepAwake());
// if its controllable, lets get the control command
if (controllable == '1') {
var apiurl = $scope.LoginData.apiurl;
var myurl = apiurl + "/controls/" + controlid + ".json";
console.log("getting control details:" + myurl);
$http.get(myurl)
.success(function (data) {
$scope.ptzMoveCommand = "move"; // start with as move;
if (data.control.Control.CanMoveRel == '1')
$scope.ptzMoveCommand = "moveRel";
// Prefer con over rel if both enabled
// I've tested con
if (data.control.Control.CanMoveCon == '1')
$scope.ptzMoveCommand = "moveCon";
console.log("***moveCommand: " + $scope.ptzMoveCommand);
ZMDataModel.zmLog("ControlDB reports PTZ command to be " + $scope.ptzMoveCommand);
})
.error(function (data) {
console.log("** Error retrieving move PTZ command");
ZMDataModel.zmLog("Error retrieving PTZ command " + JSON.stringify(data), "error");
ZMDataModel.displayBanner('error', ['did not get a valid PTZ response', 'Please try again']);
});
}
$ionicModal.fromTemplateUrl('templates/monitors-modal.html', {
scope: $scope,
animation: 'slide-in-up'
})
.then(function (modal) {
$scope.modal = modal;
$ionicLoading.show({
template: "please wait...",
noBackdrop: true,
duration: zm.loadingTimeout
});
$scope.isControllable = controllable;
$scope.showPTZ = false;
$scope.modal.show();
});
};
$scope.closeModal = function () {
console.log("Close & Destroy Monitor Modal");
// switch off awake, as liveview is finished
ZMDataModel.setAwake(false);
$scope.modal.remove();
};
//Cleanup the modal when we're done with it!
$scope.$on('$destroy', function () {
console.log("Destroy Monitor Modal");
$scope.modal.remove();
});
$scope.togglePTZ = function () {
$scope.showPTZ = !$scope.showPTZ;
};
//-----------------------------------------------------------------------
// Controller Main
//-----------------------------------------------------------------------
function monitorStateCheck() {
var apiMonCheck;
// The status is provided by zmdc.pl
// "not running", "pending", "running since", "Unable to connect"
var i;
for (i = 0; i < $scope.monitors.length; i++) {
(function (j) {
$scope.monitors[j].Monitor.isRunningText = "...";
$scope.monitors[j].Monitor.isRunning = "...";
$scope.monitors[j].Monitor.color = zm.monitorCheckingColor;
$scope.monitors[j].Monitor.char = "ion-checkmark-circled";
apiMonCheck = loginData.apiurl + "/monitors/daemonStatus/id:" + $scope.monitors[j].Monitor.Id + "/daemon:zmc.json";
ZMDataModel.zmDebug("MonitorCtrl:monitorStateCheck: " + apiMonCheck);
//console.log("**** ZMC CHECK " + apiMonCheck);
$http.get(apiMonCheck)
.success(function (data) {
ZMDataModel.zmDebug("MonitorCtrl: monitor check state returned: " + JSON.stringify(data));
if (data.statustext.indexOf("not running") > -1) {
$scope.monitors[j].Monitor.isRunning = "false";
$scope.monitors[j].Monitor.color = zm.monitorNotRunningColor;
$scope.monitors[j].Monitor.char = "ion-close-circled";
} else if (data.statustext.indexOf("pending") > -1) {
$scope.monitors[j].Monitor.isRunning = "pending";
$scope.monitors[j].Monitor.color = zm.monitorPendingColor;
} else if (data.statustext.indexOf("running since") > -1) {
$scope.monitors[j].Monitor.isRunning = "true";
$scope.monitors[j].Monitor.color = zm.monitorRunningColor;
} else if (data.statustext.indexOf("Unable to connect") > -1) {
$scope.monitors[j].Monitor.isRunning = "false";
$scope.monitors[j].Monitor.color = zm.monitorNotRunningColor;
$scope.monitors[j].Monitor.char = "ion-close-circled";
}
$scope.monitors[j].Monitor.isRunningText = data.statustext;
})
.error(function (data) {
ZMDataModel.zmDebug("MonitorCtrl: Error->monitor check state returned: " +
JSON.stringify(data));
ZMDataModel.displayBanner('error', ['error retrieving state', 'Please try again']);
$scope.monitors[j].Monitor.isRunning = "error";
$scope.monitors[j].Monitor.color = zm.monitorErrorColor;
$scope.monitors[j].Monitor.char = "ion-help-circled";
});
})(i);
}
}
function doRefresh() {
$scope.monitors = [];
var refresh = ZMDataModel.getMonitors(1);
refresh.then(function (data) {
$scope.monitors = data;
monitorStateCheck();
$scope.$broadcast('scroll.refreshComplete');
});
}
$scope.doRefresh = function () {
console.log("***Pull to Refresh");
doRefresh();
};
}]);